Join our family

618 Avenue E

San Antonio, TX 78215

8 cuft dual chamber classic blast machines

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.

Model 2463 holds 8 cubic feet of abrasive. Available as single or dual outlet

Requirements for Operation 
These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Minimum of 50 psi needed to close the pop-up valve and pressurize the blast machine.
  • OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.



Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

  • One-man portable industrial-quality blast machines manufactured to ASME code.
  • Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
  • FSV abrasive metering valve maintains smooth, consistent, adjustable media flow.



Approvals and Certifications
Clemco’s quality management system is ISO 9001-2008 certified.

Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 150-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b)..

Call 1-800-677-3487 for pricing

Toll Free: 1-800-677-3487

Local: 210-223-3157

Sales@air-equipment.com